Table of Contents
Advertisement
16I-9xB
16 Ch. Digital Input Module Data Sheet
The 16I-9xB module accepts 16 digital contact inputs using field contact voltages of 24, 48 or 125VDC. The
field contact voltage can be provided internally via the power supply regulator or externally supplied by the
customer as shown below.
Each card has two 8 way DIL switches to allow configuration for Normally Open or Normally Closed initiating
contacts as required.
Digital Inputs can be Field Contacts, Control Pushbuttons (Ack, Test, Reset, etc), as assigned via the web
browser.
The variations available are:
16I Module
16I 96B
16I 97B
16I 99B
* For Externally supplied FCV, Link LK2 must be set to ISL
Page 133
Inputs
24VDC FCV, Externally Supplied (IDC connector
48VDC FCV, Externally Supplied (IDC connector
125VDC FCV, Externally Supplied (IDC
(IDC Ribbon Connection)
Advertisement
Table of Contents
