Table of Contents
Advertisement
3. Analog Inputs
Set up the trip settings for each analog input.
4. Alarm Outputs
Use this to select the various output functions (lamp output, horn, alarm relay, etc) for
each output and assign which input(s) drive them.
5. Serial and Ethernet Configurations
This is used to configure the optional ASCII, Modbus and DNP communication protocols.
6. Combined Rack
This optional feature is used to group multiple racks to form a system with one common
unit that can display all alarms and transmit them using the communication protocols. It
is only configured on the unit with option CR in the model number.
7. Access Control
This is used to grant or deny access to various functions.
8. Network
Used to configure the IP Address for your unit.
9. Date/Time
Used to set the time and date or configure the system for external time synchronization
10. Email
Used to configure the optional email notification upon alarm
11. Save/Restore
Used for saving and restoring the web browser configuration
12. Firmware
Used for uploading new firmware to the unit
13. Option Upgrade
Used for upgrading the unit with available options
14. Color Selection
Used for customizing the color of alarms and events on the web browser
15. Logon as User
Allows you to switch from Administrator log-on to the User logon.
Page 55 of 206
Advertisement
Table of Contents
