Table of Contents
Advertisement
Typical Module Wiring Connections
Note:
Alarm Contact wetting is direct from the 48V DC supply when using the REG-94 Regulator, and
is not isolated
If contact wetting is required to be from a different supply source, or isolated, then the REG-95
Regulator should be installed
Regulators REG-94 & REG-95 require to be used in conjunction with a Supply (Terminal)
Panel which is fixed in the Logic Crate.
Module Addressing, Link & Switch settings
There are no user link or switch settings on this module
Page 119 of 206
Advertisement
Table of Contents
