Table of Contents
Advertisement
16 RR Module
The 16RR module supports 8 Reed Relay Outputs. The relay outputs can switch up to 10 watts per
output with a maximum voltage of 100 VDC and maximum current of 0.5 Amp. There are jumpers on
the board for selecting an address within the Input Card Rack. Connections are made through a 34
pin IDC Connector (2 rows of 17) for use with Ribbon Cables.
The different card types available are shown below.
Card Type
16RR 90
16RR 91
40
Output Type
Form A Relays (Normally Open)
N/C (Normally Open) Relays, w/IDC Connector
Advertisement
Table of Contents
