Table of Contents
Advertisement
16I-9XB
16 Ch. Digital Input Module Data Sheet (Terminal Block Connection)
The 16I-9xB module accepts 16 digital contact inputs using field contact voltages of 24, 48 or 125VDC. The
field contact voltage can be provided internally via the power supply regulator or externally supplied by the
customer as shown below.
Each card has two 8 way DIL switches to allow configuration for Normally Open or Normally Closed initiating
contacts as required.
Digital Inputs can be Field Contacts, Control Pushbuttons (Ack, Test, Reset, etc), as assigned via the web
browser.
Connection to the card is via a two part screw terminal connector block
The variations available are:
16I Module
16I 90B
16I 92B
16I 95B
* For Externally supplied FCV, Link LK2 must be set to ISL
130
Inputs
24 VDC FCV, Internally or Externally* Supplied
48 VDC FCV, Internally or Externally* Supplied
125VDC FCV, Externally* Supplied
Advertisement
Table of Contents
