Table of Contents
Advertisement
8 PR Module
The 8 PR Module supports 8 Power Relay Outputs. The relay outputs can switch a maximum voltage
of 240VAC or 62 VDC and maximum current of 2.0A. There are jumpers on the board for selecting a
Form A or Form B contact output and jumpers for selecting an address within the Input Card Rack.
Connection is by screw type terminals (1.5mm², 16 AWG max.). Connection is by screw type
terminals (1.5mm², 16 AWG max.)
The different card types available are shown below.
Card Type
8PR 90
42
Output Type
Form A/B (for 24VDC Systems)
Advertisement
Table of Contents
