Table of Contents
Advertisement
Alarm Outputs Configuration
This configuration screen will display the output channels in your DMS-3K model up to the
maximum 240 outputs. The configuration allows you to configure the output type (Lamp or
Alarm) and which input(s) are assigned to each output. Alarm Outputs can be connected to the
8 I/O, 16 O, I/R, 8RR, 16RR and 5 PR modules.
Output No:
Outputs start at 1 and can go to the maximum 240.
Output Number Assignments:
The Output numbers correspond to the Digital and Relay Output Modules installed in your
system. Each I/O card is addressed via switch settings to correspond to a group of outputs. For
example, if your system has (4) 16 O Digital Output Modules addressed for the first 4 positions,
the first module will have Outputs 1-16, second module has 17-32, third has 33-48 and fourth
has 49-64. If using a 8RR or 16RR module, the same concept is applied.
66
Advertisement
Table of Contents
