Table of Contents
Advertisement
Option Upgrade
DMS-3K can be upgraded in the field. The primary purpose of this function is to enable various
options that were not supplied with the original unit. The DMS-3K home page will identify the model
number of your DMS-3K unit and the options provided. A description of this model number is shown in
Chapter 1. The available options that can be upgraded are:
Option Code
WEB
IB
NTP
EM
MB
DNP
ASC
CR
1. Simply call your AMETEK representative to request new options.
a. You will need to know your unique MAC address on the DMS-3K (displayed on upgrade
page) and which options you desire to upgrade.
b. Your rep. will then give you a unique Upgrade Key specific to the unit you wish to upgrade.
2. This Upgrade Key must be entered exactly as provided.
3. Once you enter the Upgrade Key, click the Submit Key button and the unit will display the
proposed model configuration.
4. Examine the details and if they are correct, click Upgrade Unit.
5. Click the Yes button to complete the process, which will reboot the unit.
Note: If an error occurs or perhaps you mistyped a letter, a failure message will appear at the
bottom of the page. Carefully retype the Upgrade Key in and click Submit Key again. And
repeat steps 2–5.
92
Option
WEB Browser Display
IRIG-B
NTP Time Sync
Email
Modbus Protocol
DNP Protocol
ASCII Protocol
Combined Rack
Description
Displays Active Alarms and Events. Configuration
via the WEB Browser is included as standard with
the base unit.
IRIG-B Time Sync
NTP Time Sync
Email notification of alarms
Modbus communications (Serial and Ethernet)
DNP communications (Serial and Ethernet)
ASCII communications (Serial)
Single web browser displays alarms from up to 24
DMS-3K Units via Ethernet LAN
Advertisement
Table of Contents
