Table of Contents
Advertisement
8 RR Module
The 8RR module supports 8 Reed Relay Outputs. The relay outputs can switch up to 10 watts per
output with a maximum voltage of 100 VDC and maximum current of 0.5 Amp. There are jumpers on
the board for selecting an address within the Input Card Rack. Connection is by screw type terminals
(1.5mm², 16 AWG max.)
The different card types available are shown below.
Card Type
8RR 90
8RR 91
Output Type
Form A Relays (SPST Normally Open)
Form B Relays (SPST Normally Closed)
Page 39
Advertisement
Table of Contents
