Table of Contents
Advertisement
Save and Restore Configuration
Available to Administrator only, this page provides a way for you to save the unit's configuration to an
XML file. The advantage to this is if for whatever reason you need to reload the DMS-3K configuration
at a later date, you'll have the configuration file saved already. Simply browse to the file on your PC
and restore the configuration file to the unit.
Note: it is strongly advised to have a copy of each DMS-3K configuration file saved at all times. After
you make changes, save a new copy by clicking on the Save Configuration button.
To restore a configuration (refer to Figure 3–26):
Click the Browse button.
From the choose file dialog, select the configuration file to be downloaded to DMS-3K.
Click Open and a message box will pop up asking you to confirm your action. Click Ok.
Your DMS-3K unit will be re-configured with the saved file, including all Alarm Inputs and Outputs.
Figure 3–26 Save and Restore Configuration Page
Page 89 of 206
Advertisement
Table of Contents
