Table of Contents
Advertisement
Access Control Configuration
Access control is available to Administrators only. As shown in the following figure, the DMS-3K is
equipped with built-in security to prevent unauthorized access to network configuration parameters,
firmware upgrades and other critical settings. This page is where the system administrator sets up
user passwords and network configuration such as SNMP and Modbus access and port numbers. As
with most password fields, you will only see asterisks as you type in your password.
User and Admin authority are detailed below (respectively):
User Account can:
• View Active Alarms
• View Event Logs
• View Configuration Details
Admin Account can:
• Include all of the 'User' functions above
• Change configuration details (anything
with an 'Apply' button)
• Set time and date
• Acknowledge Alarms
• Erase the Event Log
Trusted IPs/hostnames
To add another level of security to your network, select the appropriate checkboxes if you wish to
restrict IP/hostnames for either SNMP or Modbus. Once checked, the traffic to the port will be
restricted, allowing access to only those addresses/hostnames that you entered into the trusted field.
This works like a firewall. You enter a semi-colon separated list of addresses or hostnames into the
trusted field.
Ports
You can enter specific Ethernet Port Addresses for Modbus TCP/IP, DNP, WEB Browser (HTTP &
HTTPS)
HTTPS
HTTPS requires users to select the secure web log on. You need to identify the specific port address
used for this secure connection.
Note: When HTTPS is enabled, you must precede the web browser url address by HTTPS://iIP
Address, instead of HTTP://IP Address.
84
• Sort and Filter Events for viewing
purposes
• Export events via csv download
• Print events
• Enable or Disable an alarm
• Change Passwords
• Save and Restore Configuration
• Firmware Upgrade
• Option Upgrade
Advertisement
Table of Contents
