CBX ELECTRICAL CONNECTIONS
ID-NET Response Time
The following figure shows the response time of the ID-NET network. This time is
defined as the period between the Trigger activation and the beginning of data trans-
mission to the Host.
Conditions
•
•
ID-NET Network Termination
The network must be properly terminated in the first and last reader of the network.
This is done by setting the ID-NET Termination Resistance Switch in the CBX100/500 to
ON.
68
MATRIX 300N
Figure 43 - ID-NET Response Time
ID-NET M/S Synchronized layout
message length = 50 bytes per node