ECC800 Data Center Controller
User Manual
Figure 7-3 Replacing a PSU
----End
7.3.3 Replacing ECC800 Antennas
Prerequisites
Procedure
Step 1 Remove the 2.4G and 3G antenna cables connected to the ports on the ECC800, as shown in
Figure 7-4.
Figure 7-4 Removing antennas
Step 2 Install the spare 2.4G antenna and 3G antenna in the original positions and connect them to
the ECC800.
----End
Issue 05 (2019-09-16)
Tools: ESD wrist strap, ESD gloves
Materials: Spare ECC800 antennas of the same model are available and functional.
Copyright © Huawei Technologies Co., Ltd.
7 Maintenance
171