Creating An Ecc800 On The Neteco - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Path
System
Settings >
Monitor
Module
IP >
WAN_1
Step 3 Set NetEco communications parameters on the ECC800 WebUI.
Table 6-2 NetEco parameters
Path
System
Settings >
NetEco >
Communicati
on
Parameters
----End

6.1.3 Creating an ECC800 on the NetEco

Prerequisites


Context
For detailed operations, see iManager NetEco 6000 Device Installation and Commissioning
Guide of the corresponding version.
Procedure
1.
Issue 02 (2019-02-28)
Parameter
IP
Subnet mask
Default
gateway
Parameter
Server IP
Port number
Link to the
monitoring IP
address
You have logged in to the NetEco client by web browser.
You have created modules or container in Data Center Planning.
Choose System > Configuration Management > Data Center Planning from the main
menu. The Data Center Planning window is displayed.
Copyright © Huawei Technologies Co., Ltd.
Default Setting
Value
192.168.1.10 Set this parameter based on the IP address
assigned by the network administrator.
255.255.255. Set this parameter based on the subnet mask
0 assigned by the network administrator.
192.168.1.1 Set this parameter based on the default
gateway address assigned by the network
administrator.
Default Setting
Value
192.168.0.1 IP address of the primary NetEco server
0
NOTE
The NetEco IP address and the ECC800 IP
address must be configured in the same
network to ensure normal connection
between the NetEco and the ECC800.
31220 31220
WAN_1 WAN_1
6 Remote Management
166