Introducing the HP E5574A Optical Loss Analyzer
Getting Started
1.6
Getting Started
This section is intended to give you general advice. Details can be
found in chapters 2 to 7, depending on the application chosen.
Please follow these steps in the given order:
1 Power-on
2 General instrument settings
3 Zeroing the heads
4 Storing the reference power
5 Checking the stability
Power-On
The OLA has been designed to measure even very small changes of
optical power.
How to Obtain the Highest Accuracy
1 After switching the instrument on and connecting the optical
head(s), wait one hour before taking measurements.
After this warm-up time, the instrument will deliver measurement
results within the specified measurement accuracy.
31
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com