Table of Contents
Advertisement
This chapter describes how to set up the Agilent AA system for
analysis and get you started using the instrument.
You should have already:
Instrument Setup
Use the following checklist to ensure that you set up your system
correctly. You must:
Agilent 240/280 Series AA User's Guide
5. Getting Started
Instrument Setup
Connections
Power
Moving Your Instrument
Starting the System
Pre-analysis Checklist
Prepared your PC and installed the SpectrAA software as
described in Chapter 3.
Become familiar with the SpectrAA user interface as described in
Chapter 4.
Connect the components of the system to one another (see
'Connections' on Page 72).
Connect the equipment to the power supply, and check the
setting of the two voltage taps where fitted (see 'Power' on Page
72).
Install the hardware components as per your analytical
requirements. Refer to the Help for details.
Getting Started
71
72
72
73
73
74
71
Advertisement
Table of Contents
