Agilent Technologies HP E5574A User Manual page 251

-223
-224
-240
-241
-300
-310
-311
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Appendix F. Error Messages
HP-IB Messages
Too much data.
The block, expression, or string data was too long for the
instrument to handle.
Illegal parameter value.
One value from a list of possible values was expected. The
parameter received was not found in this list.
Hardware error.
Shows that a command could not be executed due to a hardware
error but the control block could not be more specific.
Hardware missing.
Shows that a command could not be executed because of missing
instrument hardware.
Device-Specific Errors (-300 to -399)
These are error messages in the range -300 to -399, or between 1
and 32767. They show that an error has been detected that is
specific to the operation of the OLA.
A device-specific error is signalled by the device-specific error bit
(bit 3) in the event status register.
Device-specific error.
This shows that a device-specific error has occurred. No more
specific information is available.
System error.
An instrument system error has occurred.
Memory error.
A memory error has been detected.
249