Table of Contents
Advertisement
CAUT ION
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Appendix E. Cleaning Procedure
Cleaning Procedures
Cleaning Connector Adapters
Some adapters have an anti-reflection coating on the back to reduce back
reflection. This coating is extremely sensitive to solvents and mechanical
abrasion. Extra care is needed when cleaning these adapters.
Preferred Procedure
1 Clean the adapter by rubbing a new, dry cotton-swab over the
surface using a small circular movement.
2 Blow away any remaining lint with compressed air.
Procedure for Stubborn Dirt
Use this procedure particularly when there is greasy dirt on the
adapter:
1 Moisten a new cotton-swab with isopropyl alcohol.
2 Clean the adapter by rubbing the cotton-swab over the surface
using a small circular movement.
3 Take a new, dry soft-tissue and remove the alcohol, dissolved
sediment and dust, by rubbing gently over the surface using a
small circular movement.
4 Blow away any remaining lint with compressed air.
230
Advertisement
Chapters
Table of Contents
