Agilent Technologies HP E5574A User Manual page 248

-114
-120
-121
-123
-124
-128
-130
-131
-134
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Appendix F. Error Messages
HP-IB Messages
Header suffix out of range.
The header contained an invalid character. This message sometimes
occurs because the parser is trying to interpret a non-header as a
header.
Numeric data error.
This error shows that the parser has found an error in numeric data
(including nondecimal numeric data) but cannot be more specific.
Invalid character in number.
An invalid character was found in numeric data (note, this may
include an alphabetic character in a decimal data, or a "9" in octal
data).
Exponent too large.
The exponent must be less than 32 000.
Too many digits.
The mantissa of a decimal number can have a maximum of 255
digits (leading zeros are not counted).
Numeric data not allowed.
Another data type was expected for this command.
Suffix error.
The suffix is the unit and the unit multiplier for the data. This error
shows that the parser has found an error in suffix but cannot be
more specific.
Invalid suffix.
This suffix is incorrect or inappropriate.
Suffix too long.
A suffix can have a maximum of 12 characters.
246