Rear Panel Markings; Releasing The Fuse Holder - Agilent Technologies HP E5574A User Manual

Figure A-2
Figure A-3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Appendix A. Installation and Maintenance
AC Line Power Supply Requirements
The AC power requirements are summarized on the rear panel of
the instrument.
ISM GROUP 1 CLASS B

Rear Panel Markings

Replacing the Fuse
There is one fuse in this instrument. This is a T1.5A/250V (time-
lag) (HP Part No. 2110-0304). The fuse holder is at the rear of the
instrument, beside the line power connector.
How to Replace the Fuse
1 Release the fuse holder: use the blade of a flat-headed
screwdriver to depress the catch at the side of the holder and then
pull the holder out a little.

Releasing the Fuse Holder

168