Agilent Technologies HP E5574A User Manual page 150

command
syntax
description
parameter
errors
related commands
example
command
syntax
description
parameter
response
related commands
errors
example
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
HP-IB Programming
OLA Specific Commands
SENSe:POWer:REFerence:DISPlay:PPAR
SENSe[1|2]:POWer:REFerence:DISPlay:PPAR
This command stores the value currently measured and displayed as
the power of parasitic reflections. It is only applicable to the Return
Loss application.
1|2 1 Reads head A
2 Reads head B
Default is 1.
The message "Wrong application for this command" is returned, if
the present application is not Return Loss.
The message "No head connected" is returned, if there is no optical
head attached to the specified channel.
:SENSe:POWer:REFerence:DISPlay:PPAR?,
:SENSe:POWer:REFerence,
:SENSe:POWer:REFerence:DISPlay:PREF
OUTPUT 724;"SENS1:POW:REF:DISP:PPAR"
:SENSe:POWer:REFerence:DISPlay:PPAR?
:SENSe[1|2]:POWer:REFerence:DISPlay:PPAR?
This query returns the stored value of the parasitic reflections. It is
only applicable to the Return Loss application.
1|2 The channel parameter 1 or 2 may be present, but is ignored. P
par is valid for both channels.
The stored parasitic reflections value P par.
:SENSe:POWer:REFerence:DISPlay:PPAR
The message "Wrong application for this command" is returned, if
the present application is not Return Loss.
OUTPUT 724;":SENS:POW:REF:DISP:PPAR?"
ENTER 724;A$
148