Table of Contents
Advertisement
Figure A-4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Appendix A. Installation and Maintenance
AC Line Power Supply Requirements
2 Pull the fuse holder out of the instrument.
The Fuse Holder
3 Check and replace the fuse as necessary making sure that the
fuse is always in the top position of the fuse holder, and the
bridge is in the bottom.
4 Place the fuse holder back in the instrument, and push it until the
catch clicks back into place.
Replacing the Battery
This instrument contains a lithium battery. Replacing the battery
should be carried out only by a qualified electrician or by HP
service personnel.
There is a danger of explosion if the battery is incorrectly replaced.
Replace only with the same or an equivalent type (HP part number
1420-0394). Discard used batteries according to local regulations.
169
Advertisement
Chapters
Table of Contents
