Agilent Technologies HP E5574A User Manual page 139

example
command
syntax
description
parameters
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
HP-IB Programming
OLA Specific Commands
OUTPUT 724;":SENS:FUNC PDL"
OUTPUT 724;":SENS:FUNC STAB"
OUTPUT 724;":SENS2:DATA? STAB"
ENTER 724;A$
OUTPUT 724;":SENS:FUNC PDL"
:SENSe:FUNCtion
:SENSe[1|2]:FUNCtion[:ON]<wsp><application|value>
This command starts the specified application. It corresponds to
pressing the A key and choosing an application from the "Select
PPL
Application" menu. It can be used any time.
Note: If the specified application is already active, this command
resets the database and restarts the measurement.
1|2 The channel parameter 1 or 2 may be present, but is ignored.
:ON The ":ON" extension may be present, but is ignored.
Application|value You can enter either the literal application
mnemonic or the application number as an integer value.
Mnemonic No.
CT 0
DIR 1
IL 2
MAIN 3
MINM 4
PDCT 5
PDL 6
PI 7
POW 8
RL 9
STAB 10
137
Application
Coupler Test
Directivity
Insertion Loss
"Select Application" menu
Powermeter Min/Max application
Polarization Dependent Coupler Test
Polarization Dependent Loss
PDL/Insertion Loss
POWermeter
Return Loss
STABility