Agilent Technologies HP E5574A User Manual page 181

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Appendix B. Accessories
Connector Interfaces and Other Accessories
Connector Interfaces and Other
Accessories
The Optical Loss Analyzer is supplied with one of three output
connector interface options:
• Fiber Pigtail output with an FC/PC connector
• Straight contact
• Angled contact
ATTEN TIO N The optical input always requires angled
connectors.
Using any other connectors:
• will increase insertion loss and
• may damage the optical input.
Pigtail Optical Output Connector
The fiber pigtail optical output consists of a 9/125 µm fiber pigtail
with an FC/PC connector attached.
Straight Contact Connector
If you want to use straight contact connectors to connect to the
instrument, you must
1 attach your connector interface (see list of connector interfaces
below) to the interface adapter,
2 then connect your cable.
Model No.
HP 81000AI
HP 81000FI
179
Description
Diamond HMS-10
FC/PC/SPC