Command Descriptions - Agilent Technologies HP E5574A User Manual

command
syntax
description
example
command
syntax
description
example
command
syntax
description
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
HP-IB Programming
Standard STATUS Commands

Command Descriptions

:STATus:OPERation:CONDition?
:STATus:OPERation:CONDiton?
This query reads the contents of the OPERation:CONDition
register. Only two bits of the condition register are used.
Bit Mnemonic
8 Zeroing A
9 Zeroing B
OUTPUT 724;":STAT:OPER:COND?"
ENTER 724;A$
:STATus:OPERation[:EVENt]?
:STATus:OPERation[:EVENt]?
This query reads the contents of the OPERation:EVENt register.
Only two bits of the event register are used (whether these bits
contain information depends on the transition register
configuration):.
Bit Mnemonic
8 Zeroing A
9 Zeroing B
OUTPUT 724;":STAT:OPER?"
ENTER 724;A$
:STATus:OPERation:ENABle
:STATus:OPERation:ENABle<wsp><value>
This command sets the bits in the ENABle register that enables the
contents of the EVENt register to affect the Status Byte (STB).
Setting a bit in this register to 1 enables the corresponding bit in the
EVENt register to affect bit 7 of the Status Byte.
120
Bit Value
256
512
Bit Value
256
512