Agilent Technologies HP E5574A User Manual page 124

command
syntax
description
example
command
syntax
description
example
command
syntax
description
example
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
HP-IB Programming
Standard STATUS Commands
:STATus:OPERation:PTRansition?
:STATus:OPERation:PTRansition?
This query returns the current contents of the
OPERation:PTRansition register.
OUTPUT 724;":STAT:OPER:PTR?"
ENTER 724;P$
:STATus:PRESet
:STATus:PRESet
This command presets all the enable registers and transition filters
for both the OPERation and QUEStionable nodes:
• All the bits in the ENABle registers are set to 0.
• All the bits in the PTRansition registers are set to 1.
• All the bits in the NTRansition registers are set to 0.
OUTPUT 724;":STAT:PRES"
STATus:QUEStionable:CONDition?
:STATus:QUEStionable:CONDition?
This query reads the contents of the QUEStionable:CONDition
register. Only one bit of the condition register is used:.
Bit Mnemonic
9 Safety bit
OUTPUT 724;":STAT:QUES:COND?"
ENTER 724;A$
122
Bit Value
512