Agilent Technologies HP E5574A User Manual page 129

command
syntax
description
parameter
response
errors
example
command
syntax
description
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
HP-IB Programming
OLA Specific Commands
:PADDle:POSition?
PADDle[1|2|3|4]:POSition?
The paddle position query returns the present position of the
specified paddle (coil) of the polarization controller. It is only
applicable to the applications
• Powermeter,
• Powermeter Min/Max, and
• Return Loss.
Note: This command is only executed when the automatic sweep is
off (see ":ABORt").
1|2|3|4 The number of the paddle the position of which is to be
returned.
Default is 1.
An integer number: 0 ≤ value ≤ 999. For an explanation of the value
returned see ":PADDle:POSition".
The message "Wrong application for this command" is returned, if
the present application is not Powermeter, Powermeter Min/Max, or
Return Loss.
OUTPUT 724;":PADD3:POS?"
ENTER 724;A$
:SCAN:RATe
:SCAN:RATe<wsp><value|MIN|MAX>
The scan rate command sets the sweep speed of the polarization
controller to the desired value. It is only applicable to the
applications
• Powermeter, and
• Powermeter Min/Max.
127