Table of Contents
Advertisement
Chapter 3: Beginning the Installation
Hardware Options
RKMT-J13
Equipment Rack
Brackets Kit
78
The following hardware options for the x330-20GTX and x330-28GTX
Switches are sold separately.
Note
The x330-52GTX Switch does not require the hardware options.
Installing the x330-20GTX Switch in a standard 19-inch equipment rack
requires the RKMT-J13 brackets kit, shown in Figure 31. You can install
the switch with the front panel flush with or recessed 50mm (2 in.) behind
the front of the equipment rack. For instructions, refer to Chapter 4,
"Installing the x330-20GTX Switch in an Equipment Rack" on page 85.
Figure 31. RKMT-J13 Equipment Rack Brackets Kit for the x330-20GTX
Two equipment rack brackets
Two bracket extenders
Two handles
Four 3x6mm screws for attaching
the handles to the brackets
Twelve 4x8mm screws for attaching
the brackets to the switch
Switch
Advertisement
Table of Contents
