External Data Backup + Restore With Cf Card - Siemens SINUMERIK 802D Training Manual

C19
Brief description
1
Module objective:
Upon completion of this module you can save to a Compact flash card, a complete backup of the
control.
Module description:
Due to component defect, it may become necessary to exchange the CNC system. In such a case
the "Saved data" function is not of any use. It becomes necessary to previously store a complete
backup of the controls machine specific data. Saving the data is described in this module and also
loading the data back to a replacement control.
Module content:
•
•
SINUMERIK 802D sl Operating and Service Training Manual

External data Backup + Restore with CF card

Saving all data to CF Card
Restoring data from CF card
Saving all data to CF
Card
Restoring data from
CF card
Page 1
Section 2
Section 3
C19
C19