Group Sensor Data (Ch1 To Ch2); Function Group Configuration - Endress+Hauser Proline Prosonic Flow 93C Description Of Device Functions

Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA
Endress+Hauser
8.4

Group SENSOR DATA (CH1 to CH2)

8.4.1

Function group CONFIGURATION

→
BASIC FUNCTION G
BASIC FUNCTION → SENSOR DATA (CH1 to CH2) → CONFIGURATION
K-FACTOR Use this function to view the current calibration factor for the measuring tube and the
(6800) measuring sensors.
Display:
5-digit floating-point number, (including sign)
Factory setting:
Depends on the measuring tube and the calibration.
ZERO POINT Use this function to view the zero-point correction value for the measuring tube and the
(6803) measuring sensors The calibration at the factory determines the zero-point correction
value.
Display:
Max. 5-digit number
Factory setting:
Depends on the measuring tube and the calibration
C0 Use this function to view the current correction factor of the sound velocity for the
(6806) measuring tube and the measuring sensors. The correction factor is determined during
factory calibration.
Display:
Max. 5-digit number
Factory setting:
1.0000 (= no correction)
PROFIBUS DP GBA
(depends on PROFIBUS module)
PROFIBUS PA GCA
↓
PROCESS PARAMETER GIA
CH1
↓
PROCESS PARAMETER GIB
CH2
↓
SYSTEM PARAMETER GLA
CH1
↓
SYSTEM PARAMETER GLB
CH2
↓
SENSOR DATA CH1 GNA
↓
SENSOR DATA CH2 GNB
Functional description
8 Block BASIC FUNCTION
→
CONFIGURATION
→
CONFIGURATION
680
680
103