Function Group Information; Information; Configuration - Endress+Hauser Proline Prosonic Flow 93C Description Of Device Functions

8 Block BASIC FUNCTION
94
8.1.5

Function group INFORMATION

→
BASIC FUNCTION G
BASIC FUNCTION → PROFIBUS-DP / PROFIBUS-PA → FUNCTION BLOCKS
PROFILE VERSION Use this function to view the profile version.
(6160)
ACTUAL BAUD RATE Use this function to view the data transfer rate at which the device communicates. This
(6161) transfer rate is configured in the automation system.
DEVICE ID Use this function to view the manufacturer-specific device identification.
(6162)
Display:
• PROFIBUS DP communication output = 1531 Hex
• PROFIBUS PA communication output = 1530 Hex
!
If the option PROFILE-GSD was selected in the SELECTION GSD function (6140) the
PROFILE ID = 9741 Hex is displayed in this function.
CHECK Use this function to display whether the configuration for cyclic data transmission of a

CONFIGURATION

Class 1 master was accepted in the Prosonic Flow 93C PROFIBUS.
(6163)
Display:
ACCEPTED (configuration accepted)
NOT ACCEPTED (configuration not accepted)
Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA
PROFIBUS-DP GBA
(depends on PROFIBUS module)
PROFIBUS-PA GCA
Functional description
Note!
→
CONFIGURATION
↓
FUNCTION BLOCKS
↓
TOTALIZER
↓
OPERATION
↓

INFORMATION

Endress+Hauser
610
612
613
614
616