Group Sensor Data - Endress+Hauser PROline FieldCheck Operating Instructions Manual

9 Appendix
46
9.5.1

Group SENSOR DATA

Þ
BASIC FUNCTION G
Use this function group to display the characteristic data of the connected sensor, such as calibration
factor, nominal diameter, serial number, etc.
DEVICE TYPE
(6800)
K-FACTOR POSITIVE
(6801)
K-FACTOR NEGATIVE
(6802)
ZERO POINT
(6803)
NOMINAL DIAMETER
(6804)
FLOW DIRECTION
(6805)
SERIAL NUMBER
(6806)
TAG NAME
(6807)
SENSOR DATA
Function description
BASIC FUNCTION SENSOR DATA

Use this function to view the device type (e.g.: Promag 53)
Use this function to view the positive K factor
Use this function to view the negative K factor
Use this function to view the zero-point correction value for the sensor.
Use this function to view the nominal diameter of the sensor.
Use this function to view the set mounting direction of the sensor.
Use this function to view the serial number of the connected measuring
device.
Use this function to view the device tag name of the connected measuring
device.
PROline FieldCheck™
GNA
Endress+Hauser