Group Information Line; Function Group Configuration; Configuration - Endress+Hauser Proline Prosonic Flow 93C Description Of Device Functions

5 Block USER INTERFACE
32
5.4

Group INFORMATION LINE

5.4.1

Function group CONFIGURATION

→
USER INTERFACE C
USER INTERFACE → INFORMATION LINE → CONFIGURATION
1 = Main line
2 = Additional line
3 = Information line
ASSIGN Use this function to define the display value assigned to the information line (the bottom
(2600) line of the local display) during normal measuring operation.
Options:
OFF
CALCULATED VOLUME FLOW
CALCULATED VOLUME FLOW IN %
SOUND VELOCITY AVERAGE
SIGNAL STRENGTH (CH1 to CH2)
FLOW VELOCITY AVERAGE
CALCULATED VOLUME FLOW BARGRAPH %
SIGNAL STRENGTH BARGRAPH % (CH1 to CH2)
OPERATING/SYSTEM CONDITIONS
CALCULATED FLOW DIRECTION
AI1 to AI8 - OUT VALUE
A0 - DISP. VALUE
TOT. OUT VALUE 1 to 3
TAG NAME
Factory setting:
OPERATING/SYSTEM CONDITIONS
!
If the option PROFILE-GSD was selected in the SELECTION GSD function (6140), the
following options are not available in this function:
AI 3 to AI 8 - OUT VALUE, AO - DISP. VALUE, TOT 2 and TOT 3 - OUT VALUE
Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA
CONTROL CAA
↓
MAIN LINE CCA
↓
ADDITION LINE CEA
↓
INFORMATION LINE CGA
Functional description
1
2
3
Esc
+
-
E
Note!
→

CONFIGURATION

Endress+Hauser
260
A0001253