Endress+Hauser Proline Prosonic Flow 93C Description Of Device Functions page 102

8 Block BASIC FUNCTION
102
BASIC FUNCTION → SYSTEM PARAMETER (CH1...CH2) → CONFIGURATION
POSITIVE ZERO RETURN Use this function to interrupt evaluation of measured variables. This is necessary when a
(6605) piping system is being cleaned, for example. This setting acts on all function and outputs
of the measuring device.
Options:
OFF
ON (signal output is set to the "zero flow" value)
Factory setting:
OFF
Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA
Functional description
Endress+Hauser