Group Main Line; Function Group Configuration - Endress+Hauser Proline Prosonic Flow 93C Description Of Device Functions

Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA
Endress+Hauser
5.2

Group MAIN LINE

5.2.1

Function group CONFIGURATION

→
USER INTERFACE C
USER INTERFACE → MAIN LINE → CONFIGURATION
1 = Main line
2 = Additional line
3 = Information line
ASSIGN Use this function to define the display value assigned to the main line (the top line of the
(2200) local display) during normal measuring operation.
Options:
OFF
CALCULATED VOLUME FLOW
CALCULATED VOLUME FLOW IN %
SOUND VELOCITY AVERAGE
SIGNAL STRENGTH (CH1 to CH2)
FLOW VELOCITY AVERAGE
AI1 to AI8 - OUT VALUE
A0 - DISP. VALUE
TOT. OUT VALUE 1 to 3
!
If the option PROFILE-GSD was selected in the SELECTION GSD function (6140), the
following options are not available in this function:
AI 3 to AI 8 - OUT VALUE, AO - DISP. VALUE, TOT 2 and TOT 3 - OUT VALUE
Factory setting:
CALCULATED VOLUME FLOW
100% VALUE
!
(2201)
This function is not available unless the CALCULATED VOLUME FLOW IN % setting
was selected in the ASSIGN function (2200).
Use this function to define the flow value to be shown on the display as the 100% value.
User input:
5-digit floating-point number
Factory setting:
10 l/s
CONTROL CAA
↓
MAIN LINE CCA
Functional description
1
2
3
Esc
+
-
E
Note!
Note!
5 Block USER INTERFACE
→
CONFIGURATION 220
A0001253
25