Function Group Orig. Fact. Calibr - Endress+Hauser Proline Prosonic Flow 93C Description Of Device Functions

8 Block BASIC FUNCTION
108
8.4.5

Function group ORIG. FACT. CALIBR.

→
BASIC FUNCTION G
BASIC FUNCTION → SENSOR DATA (CH1 to CH2) → ORIG. FACTORY CALIB.
CALIBRATION DATE This function resets the calibration data of the measuring device to the factory settings.
(6910)
Procedure:
1. Enter current date.
2. Store it.
The measuring device resets the calibration data to the factory settings and restarts
automatically.
!
• The calibration data reset is recorded in the calibration history.
• The date in the CALIBRATION DATE function (6808) is overwritten.
User input:
Format depends on the selection in function FORMAT DATE/TIME (0429)
Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA
PROFIBUS-DP GBA
(depends on PROFIBUS module)
PROFIBUS-PA GCA
↓
PROCESS PARAMETER
GIA
CH1
↓
PROCESS PARAMETER
GIB
CH2
↓
SYSTEM PARAMETER
GLA
CH1
↓
SYSTEM PARAMETER
GLB
CH2
↓
SENSOR DATA CH1 GNA
↓
SENSOR DATA CH2 GNB
Functional description
Note!
→
CONFIGURATION
↓
MEASURING TUBE
↓
SENSOR PARAM.
↓
CALIBRATION DATA
↓
ORIG. FACTORY CALIB. 691
→
CONFIGURATION
↓
MEASURING TUBE
↓
SENSOR PARAM.
↓
CALIBRATION DATA
↓
ORIG. FACTORY CALIB. 691
Endress+Hauser
680
681
688
689
680
681
688
689