Codes Identifying Cells; Illustration Of The Function Descriptions; Groups - Endress+Hauser Proline Prosonic Flow 93C Description Of Device Functions

Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA
Endress+Hauser
2.1.5

Codes identifying cells

Each cell (block, group, function group and function) in the function matrix has an individual,
unique code.
Blocks:
The code is a letter (A, B, C, etc.)

Groups:

The code consists of three letters (AAA, ABA, BAA, etc.).
The first letter matches the block code (i.e. each group in block A has a code starting with an A_ _;
the codes of the groups in block B start with a B _ _, and so on). The other two letters are for
identifying the group within the respective block.
Function groups:
The code consists of three digits (000, 001, 100, etc.)
Functions:
The code consists of four digits (0000, 0001, 0201, etc.).
The first three digits are the same as the code for the function group.
The last digit in the code is a counter for the functions in the function group, incrementing from
0 to 9 (e.g. function 0005 is the sixth function in group 000).
Block Group
C CAA
2.2

Illustration of the function descriptions

1
UNIT LENGTH
0424
Fig. 1: Example for the description of a function
1 Name of the function
2 Number of the function (appears on the local display)
3 Description of the function
4 Selection or entry options or display
5 Factory setting (the measuring device is delivered with this setting/selected option)
Function group
200 2000
2
For selecting the unit for displaying the length of the nominal diameter.
The unit you select here is also valid for:
- Nominal diameter of sensor, see Function NOMINAL DIAMETER (6804).
Options:
MILLIMETER
INCH
Factory setting:
MILLIMETER
5
2 Function matrix
Functions
2001 2002
A0001251
3
4
A0004822-en
7