Endress+Hauser Proline Prosonic Flow 93C Description Of Device Functions page 26

5 Block USER INTERFACE
26
USER INTERFACE → MAIN LINE → CONFIGURATION
FORMAT Use this function to define the maximum number of places after the decimal point
(2202) displayed for the reading in the main line.
Options:
XXXXX. – XXXX.X – XXX.XX – XX.XXX – X.XXXX
Factory setting:
X.XXXX
!
• Note that this setting only affects the reading as it appears on the display, it has no
• The places after the decimal point as computed by the measuring device cannot always
Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA
Functional description
Note!
influence on the accuracy of the system's calculations.
be displayed, depending on this setting and the engineering unit. In such instances an
arrow appears on the display between the measuring value and the engineering unit
(e.g. 1.2 → m 3
/h), indicating that the measuring system is computing with more
decimal places than can be shown on the display.
Endress+Hauser