Block Quick-Setup - Endress+Hauser Proline Prosonic Flow 93C Description Of Device Functions

Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA
Endress+Hauser
4

Block QUICK-SETUP

Block Group
QUICK-SETUP
→
(B)
SETUP Use this function to start the Quick Setup menu for commissioning.
COMMISSIONING
(1002) Options:
YES
NO
Factory setting:
NO
!
You will find a flowchart of the "COMMISSIONING" Quick Setup menu on Page 18.
Please refer to the Operating Instructions for Prosonic Flow 93C PROFIBUS DP/PA,
BA 089D, for more information on Quick Setup menus.
T-DAT SAVE/LOAD Use this function to save the parameter settings / configuration of the transmitter in a
(1009) transmitter DAT (T-DAT), or to load the parameter settings from the T-DAT into the
EEPROM (manual security function).
Application examples:
• After commissioning, the current measuring point parameters can be saved to the
• If the transmitter is replaced for some reason, the data from the T-DAT can be loaded
Options:
CANCEL
SAVE (from EEPROM to T-DAT)
LOAD (from the T-DAT into EEPROM)
Factory setting:
CANCEL
!
• If the power supply fails, the totalizer readings are automatically saved to the
• The option "LOAD" cannot be executed if the T-DAT is empty or faulty.
• The option "LOAD" and "SAVE" cannot be executed if no T-DAT is present.
Function
groups
QS-
→
COMMISSION.
(1002) P. 17
Functional description
QUICK-SETUP
Note!
T-DAT as a backup.
into the new transmitter (EEPROM).
Note!
EEPROM.
4 Block QUICK-SETUP
Functions
T-DAT
→
SAVE/LOAD
(1009) P. 17
17