Useful Functions - Panasonic Windea VGDT18143W Simple Manual

Useful Functions

!
Convenient
Yuttari Talk (for the base unit)
Use this function when you want to listen slowly to the visitor during a call.
Original
speed
Hello
Hello
Yuttari
Talk is
on
1
Touch Page 1 until Yuttari OFF appears
on the screen
Yuttari Talk cannot be used when talking
Note
with the unit entrance.
2 Touch
Yuttari OFF
●
The playback speed of the call audio
slows down and it switches to
Yuttari ON
● Touch to return to the original
Yuttari ON
audio speed and switch to
Yuttari OFF
In some cases when the visitor talks continuously
Note
without any pauses, only the initial part of the call
may be slowed down when Yuttari Talk is used.
You can use Yuttari Talk at any time by just
pressing the TALK button by setting "Yuttari
On/Off: On (Immediately)" ( Page 106).
32
Your delivery has arrived
非常
EMERG.
復旧/警報音停止
RESET/ STOP ALARM
火災
確認
FIRE CONFIRM
メニュー
MENU
終了
OFF
Your delivery has arrived POWER 電源 解錠
UNLOCK
TALK 通話
Silence during the call
● Talking with the main entrance
.
.
Touch
Useful Functions
Convenient
Excuse Function
Use this function when you want to end a call quickly. It helps to end the call quickly by
playing a sound of a telephone or a crying baby.
Note
Excuse function is not available when receiving a call from the building manager room.
(
Excuse
Touch Excuse
● The excuse tone plays quietly from the base unit and
the call sub-base unit with monitor during the call and
can be heard from the main or unit entrance.
● Use the excuse tone to end the call.
● You can select and configure three different
types of "Excuse Tone" (
Touch
Convenient
Continuation Function
You can extend the call time when you are talking with the main entrance, unit entrance,
building manager room (with video capability), or other unit and want to extend the time to
1 minute or more. Use the Continuation function to extend the call up to 3 minutes.
(Normally, the call ends automatically after approximately 1 minute.)
Touch
Cont
● begins flashing approximately
Cont
50 seconds after the call starts.
● You can talk for an additional minute after
the initial 1 minute finishes.
The
Cont
approximately 1 minute and 50 seconds
after you start the call.
●
The call can be extended up to two times.
The maximum calling time including extended
time is approximately 3 minutes.
When talking with the building manager room (without video capability)
●
begins flashing approximately 3 minutes and 50 seconds after the call starts. Touch
Cont
the call to continue. You can talk for an additional 3 minutes after the initial 4 minutes are finished.
(The display starts flashing again approximately 6 minutes and 50 seconds after you start
Cont
the call.)
● The call can be extended up to two times. The maximum talking time including extended time is
approximately 10 minutes.
(For base unit/call sub-base unit with monitor)
!
does not appear.)
page 102).
Touch
非常 I'm sorry, but I'm
EMERG.
getting another
復旧/警報 音停止
RESET/STOP ALARM
call. Please
火災
確認 excuse me.
FIRE CONFIRM
メニュー
MENU
終了
OFF
電源 解錠
POWER
UNLOCK
通話
TALK
!
display starts flashing again
● Talking with the main entrance
Receiving a Call
● Talking with the main entrance
Touch
during
Cont
33