When An Elevator Stops - Panasonic Windea VGDT18143W Simple Manual

Using the Simplified Earthquake Intensity Display
If the Earthquake Early Warning System (prediction) information was
incorrect
If incorrect information is received, the system reports the event with a screen display and sound.
●
The message volume can be adjusted.
( Page 120)
●
The error report message turns off approximately
1 minute after receiving the error report signal.
The call sub-base unit with monitor plays the
Note
alert at the volume configured with the base
unit. The volume of the call sub-base unit
cannot be adjusted. The volume corresponds
with the "High" setting.
How to stop error messages
●
Press the STOP ALARM button.
Testing the Earthquake Early Warning System (prediction) from
the building manager room
If test information is received, the system reports the event with a screen display and sound.
●
The earthquake (test) display turns off when
the test message stops.
How to stop test messages
●
Press the STOP ALARM button.
180
In the Event of an Earthquake
(Beep) The earthquake alarm
from a moment ago was an error.
Please be at ease.
STOP ALARM
button
復旧/警報音停止
RESET/ STOP ALARM
Incorrect error
message appears
in white
Call sub-base unit
電源
Emergency earthquake
POWER
alert (error) is
occurring
● For base unit
(Beep) We are now beginning an earthquake
alarm test. (Siren) Warning! A strong
earthquake is about to come.
(Beep) The earthquake alarm test is now over.
STOP ALARM button
復旧/警報音停止
RESET/ STOP ALARM
Earthquake (test)
icon flashes in red
Earthquake display
flashes in red
Call sub-base unit
電源
Emergency earthquake
POWER
alert (test) is
sounding
● For base unit

When an Elevator Stops

●
These screens appear in a condominium in which the Earthquake Early Warning System
Note
interface board is installed and linked with the elevator system.
●
Confirm that system components are properly installed before using the system.
When an Elevator Stops
When an elevator stops when an earthquake occurs, the system reports the event with a screen
display and sound.
● The elevator operation stop message turns off
after approximately 1 minute.
If an elevator stops during the Earthquake Early
Note
Warning System (prediction) alarm, the "Elevator
Stopped" message appears in the upper-right of the
earthquake information display screen.
How to stop the report message
● Press the STOP ALARM button.
When an Elevator Restored Operation
When an elevator gets restored, the system reports the event with the screen display and sound.
●
The elevator operation restored message
turns off after approximately 1 minute.
How to stop the report message
●
Press the STOP ALARM button.
(Beep) The elevator has stopped
because of an earthquake.
The elevator has stopped because of
an earthquake.
STOP ALARM
button
復旧/警報音停止
RESET/ STOP ALARM
Elevator operation
stop message
appears in red
電源
POWER
Call sub-base unit
Elevator-stopping
● For base unit
sound is emitting
(Beep) The elevator is working
again. The elevator is working again.
STOP
ALARM button
復旧/警報音停止
RESET/ STOP ALARM
Elevator operation
restored message
appears in red
電源
POWER
Call sub-base unit
Elevator-operation
● For base unit
restored sound is
emitting
181