Table of Contents
Advertisement
Extension Call
(Call with base unit/call sub-base unit)
Calling an Extension
For Base Unit/Call Sub-base Unit with Monitor
1
Open the Calling screen
(
Page 41)
2
Touch
●
Calls the base unit or sub-base unit.
●
The base unit can call either "Room 1",
"Room 2", or "All" if the 2 call sub-base
units are connected. (The call sub-base
unit with monitor can call only "All".)
●
Depending on the equipment and operating
Note
configuration of the condominium that you are
living in, the call destination description differs.
●
For the call sub-base unit with monitor, "Other
Unit", "Message" will not appear.
3
Call tone "beep" sounds
●
After calling, you can talk for approximately
10 seconds even without pressing the
TALK button. (The TALK button lights up in red.)
●
After approximately 10 seconds, the status
changes to the waiting state of answering (the call
is ended once) and the TALK button goes off.
●
If approximately 30 seconds pass without any
answer after the call tone sounds, the TALK button
of the base unit and call sub-base unit will turn off
automatically.
●
Touch
to return to the call state again.
Call agn
4
Talk once the call destination answers
●
It is enabled to talk with a base unit or
sub-base unit which replied.
●
A base unit or sub-base unit will return to
the waiting state if there is no reply.
●
The conversation will end automatically in
approximately 1 minute from the start of the call.
Note
The conversation time cannot be extended.
5
Press the TALK button to end
●
The extension call ends.
44
Touch
● When calling "All"
通話
TALK
Press
Calling an Extension
For Call Sub-base Unit
1
Press the EXTENSION button
●
Calls the base unit or another
sub-base unit.
2
Call tone "beep" sounds
●
After calling, you can talk for approximately
10 seconds even without pressing the
TALK button. (The TALK button lights up in
green.)
●
After approximately 10 seconds, the status
changes to the waiting state of answering
(The call is ended once) and the TALK
button goes off.
●
If approximately 30 seconds pass without
any answer after the call tone sounds, the
TALK button of the base unit and call
sub-base unit will turn off automatically.
3
Talk once the call destination answers
●
It is enabled to talk with a base unit or
sub-base unit.
●
A base unit or sub-base unit will return to
the waiting state if there is no reply.
●
The conversation will end automatically in
approximately 1 minute from the start of the call.
Note
The conversation time cannot be extended.
4
Press the TALK button to end
●
The extension call ends.
VGD13113W
VGD13113W
非常
EMERG.
警報
警報
管理
管理
ロビー
ロビー
ALARM
ALARM
MANAGER
MANAGER
LOBBY
LOBBY
解錠
EXTENSION
室内呼
UNLOCK
EXTENSION
呼出音量
button
VOLUME
通話
TALK
Press
VGD13113W
VGD13113W
非常
EMERG.
警報
警報
管理
管理
ロビー
ロビー
ALARM
ALARM
MANAGER
MANAGER
LOBBY
LOBBY
TALK button
解錠
室内呼
UNLOCK
EXTENSION
呼出音量
VOLUME
通話
TALK
Press
45
Advertisement
Table of Contents
