Panasonic Windea VGDT18143W Simple Manual page 35

When You Want to Know the Scene around the Unit Entrance
(For base unit, call sub-base unit with monitor)
If a door phone with camera is installed in the unit entrance, you can check the image around
the entrance. Check whether a door phone with camera is installed in the unit that you are living
in first before use.
1
Press the MENU button in
the waiting state (nothing is
displayed on the screen)
● The Top Menu screen appears.
Note
See Page 41 when calling the unit entrance.
2
Touch
●
The Camera Monitor screen appears.
3
Touch
● An image of the scene at the entrance
appears.
● Sounds at the entrance will be audible.
Sounds inside the room will not be
audible at the entrance.
●
If you press the TALK button when the
image is shown, you will be able to talk
with the person at the entrance.
If the TALK button is pressed again,
the conversation will end and the
screen will disappear.
●
The image can be adjusted if it is hard
to see. ( Pages 29 to 30)
If you are using a base unit with the browser
Note
function, and the public camera monitor function
has been set up, the selection screen will appear.
3
(Step on Page 65)
4
Press the END button after checking
●
It will return to the waiting state
(nothing is displayed on the screen).
Note
The image will automatically disappear approximately
30 seconds after it is shown.
64
復旧/警報音停止
RESET/ STOP ALARM
MENU button
電源 Press
火災 ガス 留守 警戒 戸締り
FIRE GAS NOTHOME SET OPEN
POWER
● For base unit
Touch
Touch
終了
OFF
Press
When You Want to Know the Scene of the Common Area
(For base unit with browser function)
If the installed public camera (monitoring camera etc.) is linked to the condominium HA system,
and you are using a base unit with the browser function, you can check the image in the public
area. (If you do not know the operating status, check with the management company, building
manager room, etc.)
1
Press the MENU button in
the waiting state (nothing is
displayed on the screen)
● The Top Menu screen appears.
2
Touch
● The Camera Monitor screen appears.
3
Touch
● The Public Camera screen appears.
4
Select the place you want to see
●
The maximum number of the public camera
displayed on the screen is up to 8.
The display details of the public camera vary
Note
depending on the operating configuration of
the condominium HA system.
5
Situation of the selected place is shown
●
Situation of the selected place can be
checked with the image.
● Sounds around the public camera will not be
audible. In addition, sounds inside the room
cannot be heard by those around the
common area camera.
●
If you want to view the situation at another location,
touch and perform the operation in Step
Return
Depending on the operating status and network
Note
status, the message "The line is busy. Please try
again later." may appear and it may
take a while for the image to be shown.
6
Press the OFF button after checking
●
It will return to the waiting state (nothing is displayed on the screen).
Note
The image will automatically disappear approximately 30 seconds after it is shown.
復旧/警報音停止
RESET/ STOP ALARM
MENU button
電源
火災 FIRE ガス GAS 留守 NOTHOME 警戒 SET 戸締り OPEN Press
POWER
Touch
Touch
Touch
the place
you want
to see
4
.
65