Table of Contents
Advertisement
2.
Talk Function
1
Enter the unit number with the numeric
buttons
Example 1) When calling Unit 101
Press the unit number............
1
Example 2) When there is a building number
(calling Unit 101 of Building 2)
Press the building number.........
●
Press the number............
●
1
Press the
button (clear button) and operate from
●
消
the beginning again when wrong number is entered.
2
Press the
呼出
button
"Trilling" sound is played.
●
Call is ended after approximately 30 seconds or
●
approximately 60 seconds has elapsed when the unit
does not answer.
For the operation of the unit, see "Receiving a Call"
(
page 22).
The talk time is maximum 3 minutes.
●
Note
"Unit is engaged. Please wait for a while before
●
calling." is displayed in the LCD monitor when the
called unit is engaged in another call or when all the
calling channels of the system are busy.
●
The visiting unit cannot be called when fire or gas
leak alarm is sounding in that unit.
Calling Building Manager Room
1
Press the
button
2
Press the
呼出
button
"Trilling" sound isplayed.
●
Call is ended after approximately 30 seconds has
●
elapsed when the building manager room does not
answer.
The talk time is maximum 3 minutes.
●
Note
●
"Unit is engaged. Please wait for a while before calling."
is displayed in the LCD monitor when the called building
manager room (the building manager room base unit or
the integrated control panel) is engaged in another call.
It is necessary to set the building manager room (the
●
building manager room base unit or the integrated
control panel) that can be called from the lobby phone in
advance on the lobby phone. (Consult with the
management company or the building manager room.)
210
Calling Unit
Lobby phone with camera
0
1
電源
2
0
1
1
2
3
4
5
6
7
8
9
0
消
呼 出
(clear button)
2
呼出
1
Numeric buttons
Lobby phone with camera
電源
1
2
3
4
5
6
7
8
9
0
消
呼 出
2
呼出
1
button
3.
Main Entrance Unlock Function
Note
Setting of security number is required. (Consult with the management company or the building manager room.)
1
Press the
2
Enter the security number (4 digits)
with the numeric buttons
The entered security number appears as "
●
●
Press the
operate from the beginning again when
wrong number is entered.
3
Press the
The main entrance is unlocked.
●
"Unlock" appears on the LCD monitor and
●
unlock sound is played.
消
button
button
Note
Installation of the maison key switch or the contactless key reader (ID verification device) is required.
Insert the key to the key hole of
the maison key cylinder and twist
Or, wave the contactless card, etc., over
the contactless key reader (ID verification
device) is required
The main entrance is unlocked.
●
"Unlock" appears on the LCD monitor and unlock
●
sound is played.
"Unlock" may not appear on the LCD monitor
Note
depending on the link setting with the ID verification
device.
button
The main entrance (electronic lock) can be kept unlocked during the specified time period.
(Consult with the management company or the building manager room.)
Unlocking with the Security Number
button
".
消
button (clear button) and
呼出
button
Unlocking with the Maison Key or the Contactless Key
Unlocking by Time Period (Continuous Unlock Function)
Lobby Phones
Lobby phone with camera
電源
1
2
3
4
5
6
7
8
9
0
消
呼 出
消
button
(Clear button)
3
呼出
button
1
button
2
Numeric buttons
電源
1
2
3
4
5
6
7
8
9
0
消
呼 出
Maison key cylinder or reader
211
Advertisement
Table of Contents
