Panasonic Windea VGDT18143W Simple Manual page 46

Changing Each Setting of Living Mode
Note
The current setting will not change even the setting is changed. Select the living mode again.
1
Press the MENU button in the
waiting state (nothing is
displayed on the screen)
●
The Top Menu screen appears.
2
Touch the "Living mode display
area"
● The Mode Change screen appears.
3
Touch
●
The mode selection screen appears.
4
Touch the living mode you want
to change
● The details screen of the touched living
mode appears.
Example: To change the Absence mode
86
復旧/警報音停止
RESET/ STOP ALARM
MENU button
電源
火災 FIR E ガス GAS 留守 NOTHOME 警戒 S ET 戸締り OPEN
POWER
Press
Touch
In Home mode
●
Touch
Touch
5
Touch of the setting you
want to change
● Each setting screen appears.
Note There is no difference in setting items for each
living mode.
Not home
Sets the Not-home setting for the set
mode.
6
Touch one of "ON (Immediately)/
ON (Ringtone Ends)/On (After 15 sec.)/
Off", and touch
ON The response message is sounded right
(Immediately) after the ringtone sounds for 1 phrase.
ON The response message is sounded
(Ringtone Ends) 5 seconds before the ringtone ends.
On The response message is sounded after
(After 15 sec) the ringtone sounds for 15 seconds.
Off Will not perform absence response.
Security
Sets the Security setting for the set mode.
6
Touch either of "On/Off", and touch
On Will arm the security vigilance.
Off Will not arm the security vigilance.
■ When security is set to individual alarm
● This security circuit that is set appears.
(Maximum of 4 circuits)
Continued to next page
Living Mode Switching
(For base unit)
Touch
any one
Not Home screen
1
Touch
any one
2
Touch
Security screen
1
Touch
any one
2
Touch
87