Panasonic Windea VGDT18143W Simple Manual page 72

Electricity Target Value Setting
The target value (monthly usage) of the electricity usage can be set from the past actuals or by
directly entering the target value. The target is displayed in the Intergal Power screen
( pages 78 to 79) based on this setting value, enhancing the energy saving consciousness.
1
Touch in the Energy Saving
Monitor screen
● The Setting screen appears.
● For how to display the Energy Saving
Monitor screen, see page 73.
2
Touch
●
The Target Value Setting screen appears.
● The Electricity Target Value Setting screen
appears when the pulse transmitting flow
meter (water) and the pulse transmitting
gas meter is connected. Proceed to the
4
operation of step .
3
Touch
●
The Electricity Target Value Setting screen
appears.
4
Select the setting method and
touch
Same Month in Previous Year
●
Sets by the percentage of reduction from
the usage of the same month in the previous year
Reduction from Prev Mon.
● Sets by the percentage of reduction from
the previous month
Direct Input
● Sets by entering the value directly
138
Touch
Touch
Touch
2
Touch
1
Touch
any one
Setting the Energy Saving Monitor
5
Set the target value
●
The minimum value that can be set is 100 kW. The screen as
in right will appear when the entered value is less than 100 kW.
Select to set to the minimum value. Touch
return to the Direct Input screen.
●
The maximum value that can be set is 999 kW. "Short beeps" will sound
when the entered value is more than 999 kW, and it is not accepted.
●
Select "Direct Input" in using this product for the first time,
because previous data does not exist. A message "There is no data for the month use in the
target setting. Please reset the target value" appears on the screen when "Same Month in
Previous Year" or "Reduction from Prev Mon." is selected. Touch
again. Use the usage from the electricity company as a reference for the target value.
For
Same Month in
Previous Year/
Reduction from
Prev Mon.
1
Select the reduction target (%)
and touch
2
Touch
●
Returns to the Target Value Setting screen.
●
It will return to the Setting screen when the pulse
transmitting flow meter (water) and the pulse
transmitting gas meter is not connected.
For
Direct
Input
1
Enter the target value
●
Enter the value in the range of 100 kWh to 999 kWh.
● Initial setting: 300 kWh
2
Touch
●
Returns to the Target Value Setting screen.
● It will return to the Setting screen when the pulse
transmitting flow meter (water) and the pulse
transmitting gas meter is not connected.
● Touch to erase the entered value.
6
Press the OFF button when setting
is completed
● It will return to the waiting state (nothing
is displayed on the screen).
Touch to set other items
●
Returns to the Setting screen.
(Eco Setting)
(For base unit)
to
and perform the setting
Electricity Target Value Setting
(Same Month in Previous Year) screen
1
Touch
any one
2
Touch
Electricity Target Value Setting
(Direct Input) screen
1
Touch
the numeric
buttons
2
Touch
終了
OFF
Press
139