Water Target Value Setting
The target value (monthly usage) of the water usage can be set from the past actuals or by
directly entering the target value. The target is displayed in the Intergal Power screen
(
pages 78 to 79) based on this setting value, enhancing the energy saving consciousness.
Note
This setting can be set only when the pulse transmitting flow meter (water) is connected.
1
Touch
in the Energy Saving
Monitor screen
●
The Setting screen appears.
●
For how to display the Energy Saving Monitor
screen, see page 73.
2
Touch
●
The Target Value Setting screen appears.
3
Touch
●
The Water Target Value Setting screen appears.
This item does not appear when the pulse
Note
transmitting flow meter (water) is not
connected.
4
Select the setting method and
touch
Same Month in Previous Year
●
Sets by the percentage of reduction from
the usage of the same month in the previous year
Reduction from Prev Mon.
●
Sets by the percentage of reduction from
the previous month
Direct Input
●
Sets by entering the value directly
140
Touch
Touch
Touch
2
Touch
1
Touch
any one
Setting the Energy Saving Monitor
5
Set the target value
●
The range of value that can be set is 1 m
to
3
100 m
. The screen as in right will appear
3
when the enterd value is out of this range.
Select
to set 1/100 as the minimum
value or the maximum value. Touch
to return to the Direct Input screen.
●
Select "Direct Input" in using this product for
the first time, because previous data does
(When set to less than 1 m
not exist. A message "There is no data for
the month use in the target setting. Please reset the target value" appears on the screen when
"Same Month in Previous Year" or "Reduction from Prev Mon." is selected. Touch
perform the setting again. Use the usage from the water agency as a reference for the target value.
For
Same Month in
Previous Year/
Reduction from
Prev Mon.
1
Select the reduction target (%)
and touch
2
Touch
●
Returns to the Target Value Setting screen.
For
Direct Input
1
Enter the target value
●
Enter the value in the range of 1 m
to 100 m
3
●
Initial setting: 25 m
3
2
Touch
●
Returns to the Target Value Setting screen.
●
Touch
to erase the entered value.
6
Press the OFF button when setting
is completed
●
It will return to the waiting state (nothing
is displayed in the screen).
Touch
to set other items
●
Returns to the Setting screen.
(Eco Setting)
(For base unit)
3
)
(When set to more than 100 m
3
)
and
Water Target Value Setting
(Same Month in Previous Year) screen
1
Touch
any one
2
Touch
Water Target Value Setting
(Direct Input) screen
1
.
3
Touch
the numeric
buttons
2
Touch
終了
OFF
Press
141