Panasonic Windea VGDT18143W Simple Manual page 12

Inserting and the Removing microSD Memory Card (For Base Unit)
●
Insert the microSD memory card during the waiting state (nothing is displayed on the screen).
Note
The record save destination screen is displayed when inserted. (
●
To remove the microSD memory card, perform the removal operation following page 117.
1 2
Remove the setting cover Check the direction of the
microSD memory card,
火災
and insert straight until it
確認
FIRE CONFI
RM
"clicks".
メニュ ー
MENU
電源
終了
POWE R
OFF
解錠
UNLO CK
通話
TALK
Groove
Setting cover
● Open by hooking a finger into the groove
3
Attach the setting cover
1
Insert the setting
Setting cover
cover to the
insertion hole
setting cover
insertion hole on
the main unit
1
2
Lightly align the
hooks to the groove
3
Press with a finger
Using a Handset (Receiver) (Sold Separately) (For Base Unit/Call Sub-base Unit with Monitor)
A handset (receiver) sold separately can be installed.
(Consult with the management company or the company that
installed the system.)
[Calling with the handset (receiver)]
1
Talk by lifting the receiver when call is received
2
Return the receiver when the call is completed
You can switch to talking on receiver by lifting the receiver while
talking in hands free. Return the receiver when the call is completed.
It is not possible to switch to talking in hands free while talking on
Note
the handset (receiver).
Using the Extension Speaker
The alarm or call sound is sounded simultaneously with the base unit when the extension speaker sold
separately is connected.
〔The flash lamp will flash simultaneously with the call or alarm sound for the luminous extension speaker.〕
Note The extension speaker or the luminous extension speaker cannot be connected when 2 call sub-base units are
connected.
18
Page 117)
Removing the microSD
メニ ュー
memory card
MEN U
電 源 Press the microSD memory card until it
終 了
POW ER
電 源
"clicks", and pull the ejected card straight POW ER
OFF
out.
施工 店様 解 錠
へ
■設 定時 UNL OCK 施工 店様
、 こ の保 へ
はず し て設 護シ ート
定し てく を
ださ い。 ■設 定時
■設 定完 、 こ の保
了後 、 はず 護シ ート
も と 保護 シー し て設 定し てく を
に戻 し てく ださ ト を
■設 定完 ださ い。
い。 了後 、
も と 保護 シー
に戻 し ト を
てく ださ
い。
通 話
TAL K
Notch microSD
Memory card
microSD
Memory card
メニュ ー
Setting
電源
終了
cover
解錠
施工店 様へ
■設定
時、 こ
はずし て設定 の保護 シート
し てく を
■設定 完了後 ださ い。
も と 、 保護シ
に戻し てく ださ ート を
い。
通話
Hooks
Lightly align the hook to
2
Groove
the groove
Handset (receiver)
Recessed type: SHV8110K
Difference of the Screen Display on the Base Unit and the Call Sub-base Unit with Monitor
● Part of the screen display may be different on the base unit and the call sub-base unit with
monitor depending on the different functions, settings, and installed devices. The following
illustration is a display example of the "talking" screen.
● The operation on the call sub-base unit is not possible while operating the base unit. Similarly,
メニ ュー
MEN U
operation on the base unit is not possible while operating the call sub-base unit.
終 了
OFF
This operation manual is basically describing with the screen of the base unit with video and
Note
sound recording function unless otherwise noted.
開 錠
UNL OCK
通 話
Example: "Talking (with separately installed camera)" with lobby phone screen
TAL K
■ Base unit
3
●
REC
Press with
●
a finger
REC
sound recording function.
2
Part Names and Functions
■ Call sub-base unit with monitor
●
appears.
on the call sub-base unit with
appears for the base unit with
monitor since it has no video
or sound recording function.
does not appear.
REC
19