Table of Contents
Advertisement
Note
"Earthquake Setting" does not appear in the Setting screen if the the Earthquake Early Warning System
(forecast) supported system is not installed to the condominium. If the installed facilities are not clear,
consult the administration company or building manager room.
1
Touch
in the Setting screen
●
The Earthquake Setting screen appears.
●
For how to start the setting, see page 97.
2
Touch
for the content to set
●
The sound setting screen for the selected earthquake intensity appears.
The Following screen display is determined by the setting of the control device or integrated control panel.
Note
(Consult with the management company or the company that installed the system.)
● When set to "Detailed earthquake intensity display"
Touch to
Touch
go to 2/2
any one
3
Select one of "Off/Low/Medium/High",
and touch
It will sound in set volume when
High, Medium, Low
an earthquake occurs.
The earthquake notification sound
does not sound and nothing is
Off
displayed on the screen even when
an earthquake occurs.
Initial setting
■ For detailed earthquake intensity display
Intensity 3, Intensity 4, False alarm: Medium
●
Intensity 5-lower, Intensity 5-higher, Intensity 6 or higher: High
●
Note
●
The call sub-base unit with monitor will sound in the volume set in the base unit.
●
Volume of the call sub-base unit is not adjusted. Volume is equivalent to "High".
4
Press the OFF button when setting
is completed
●
It will return to the waiting state (nothing
is displayed on the screen).
120
Earthquake Setting
Touch
● When set to "Simplified
Touch to
earthquake intensity display"
go to 1/2
Touch
any one
● For detailed earthquake
intensity display (intensity 4)
■ For simplified earthquake intensity display
Intensity 4 or lower, False alarm: Medium
●
Intensity 5-lower or higher: High
●
終了
OFF
Mobile Device Adapter Setting (Only When Mobile Device Adapter (Supports Smartphone and Tablet) is Connected)
Note
"Mobile Device Adapter Setting" in the Setting screen does not appear unless the mobile device adapter is
installed in the unit.
1
2
3
-1
Touch
any one
3
-2
1
Touch
any one
2
Touch
3
-3
Press
Setting According to Your Preferences
Touch
in the Setting screen
●
The Mobile Device Adapter Settings screen
appears.
●
For how to start the setting, see page 97.
Touch the content to set
●
Each setting screen appears.
Touch
any one
Mobile Device Registration
Touch
●
2
It will return to the screen of step
when
is touched.
Touch
Register smartphone or similar to
the mobile device adapter.
●
For details, refer to the manual of the mobile device
adapter (supports smartphone and tablet).
Touch
once the registration of
smartphone or similar is completed
Touch
Mobile Device Registration screen
Touch
121
Advertisement
Table of Contents
