Table of Contents
Advertisement
8. Additional functions
8.1 Zooming in and out (wide/
zoom, pan/tilt; main monitor and
extension monitor only)
These functions are not available for the supplied
doorphone (VL-V522L). You can use these functions
with optional doorphones (page 4).
When on a call or monitoring, you can display images in
wide mode or in zoom mode. During zoom mode, you
can change the zoom position (also called "pan/tilt").
To switch from wide mode to zoom mode
Press
.
To switch from zoom mode to wide mode
Press
.
To change the zoom position in zoom mode
® "Pan/tilt" ®
or
Note:
R See page 14 for examples of wide mode and zoom
mode.
R The zoom feature uses a digital zoom. As a result,
the image quality of zoomed images is lower than
wide display images.
R When images are recorded in zoom mode, only the
zoomed area is recorded.
R If you adjust these settings, the settings will be
cancelled the next time you display an image. To
change how doorphone images are initially displayed
on the main monitor, see page 14.
8.2 Sound and display settings for
calls and monitoring
While monitoring or on a call, you can press
(M
N or other buttons for the sub monitor) to display
the options menu and change sound and display
settings.
To adjust the incoming call volume
R Main monitor/extension monitor:
® "Sound" ®
volume" ® adjust the volume.
R Sub monitor:
Adjust the volume
To adjust the volume heard at the doorphone
monitor and extension monitor only)
® "Sound" ®
volume" ® select the desired setting.
To use the voice changer
at the doorphone sound deeper)
R Main monitor/extension monitor:
22
® press
*1
® "Receiver
.
*1
(main
® "Owner's voice
*1
(makes the voice heard
® "Sound" ®
changer" ® select the desired setting.
R Sub monitor:
N ® "VOICE CHANGER" ®
M
To turn off the operation guide (main monitor and
extension monitor only)
® "Guide off" ®
R While the guide is turned off, the soft keys do not
operate their respective features. Press a soft key
other than M
N to display the guide again briefly.
During this time, the soft keys can be operated as
normal.
To turn on the operation guide (main monitor and
extension monitor only)
Press a soft key other than M
®
® "Guide on" ®
To adjust the screen brightness
R Main monitor/extension monitor:
® "Display" ®
"Brightness" ® select the desired setting.
R Sub monitor:
N ® "BRIGHTNESS" ®
M
the desired setting.
To adjust backlight compensation (main monitor
and extension monitor only)
® "Display" ®
compensation" ® select the desired setting.
To turn the LED lights on or off (main monitor and
extension monitor only)
® "Display" ®
"Illumination" ® select the desired setting.
R
is displayed when the LED lights are on.
Scrolling an image right or left (sub monitor only)
Press
.
R The displayed image is scrolled slightly to the right or
left.
*1 These settings cannot be changed during an
incoming call.
® "Voice
(OK).
.
N to display the guide
.
®
(OK) ® select
® "Backlight
®
Advertisement
Table of Contents
